- Diagnostic Tools[2]
- Contactors[6]
- Generator Parts & Accessories[32]
- Healthcare Supplies[1]
- Household Thermometers[2]
- Ceiling Lights[26]
- Gas Analyzers[9]
- Moisture Meters[17]
- Other Analysis Instruments[6]
- PH Meters[2]
- Multimeters[10]
- Other Electrical Instruments[12]
- Industrial Metal Detectors[5]
- Flow Meters[3]
- Level Measuring Instruments[3]
- Gauges[15]
- Other Optics Instruments[7]
- Refractometers[25]
- Other Measuring & Analysing Instruments[10]
- Force Measuring Instruments[17]
- Hardness Testers[22]
- Other Physical Measuring Instruments[10]
- Temperature Instruments[19]
- Testing Equipment[38]
- Used Measuring & Analysing Instruments[3]
- Weighing Scales[2]
- Protractor[1]
Multi-Echo Ultrasonic Thickness Gauge(UM-3)
The multi-echo is used to enhance the accuracy with the resolution of 0.0001 and the low limit of 0.012
Product Name:Ultrasonic Thickness Gauge(UM-3)
Single-crystal delayed probe is employed by UM-3 precise ultrasonic thickness gauge. The multi-echo is used to enhance the accuracy with the resolution of 0.0001’’ and the low limit of 0.012’’. There are two operating modes of M-3 ultrasonic thickness gauge: I-E (interface-echo) mode and E-E mode. The measuring range of I-E mode is 0.059’’-0.709’’, while the measuring range of E-E mode is 0.012’’-0.394’’.
Standard package:
UM-3 thickness gauge Standard probe (single-crystal delayed probe) Carrying case Two 1.5V AA alkaline batteries Couplant Operating manual Certification of quality Packaging list
Operating principle:
I-E (interface-echo) mode with single-crystal delayed probe E-E (echo-echo) mode with single-crystal delayed probe
Measuring range:
1.5mm to 18mm; 0.059in-0.709in in I-E mode 0.25mm to 10mm; 0.012in-0.394in in E-E mode Depending on probe, material and surface condition
Digital resolution:
H less than 0.4in : 0.0001in/ 0.001in/ 0.01in or 0.001mm/0.01mm/0.1mm H more than or equal to 0.4in : 0.001in/ 0.01in or 0.01mm/0.1mm
Units:
Selectable: inch or mm
Display:
128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm
Measurement update rate:
4 Hz in standard measurement mode 25 Hz in MIN capture mode
Material velocity range:
1000 to 9999 m/s; 0.039 to 0.394 inch/µs
Power:
Two 1.5V AA alkaline batteries Warning with low battery voltage
Operating time:
Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode
Auto shut-off:
After 5 minutes of non-use
Operating temperature:
-10°C to +50°C; +14°F to +122°F Specification to -20°C/-4°F on request
Size:
5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D)
Weight:
200g; 7oz (including batteries)
Data logger capacity:
Up to 500 readings can be divided into a maximum of 5 files (user-selectable)
Optional accessories:
Attachable rubber case Numerous special probes on request Couplants and high-temperature couplant 4-step/6-step block for calibration Data transmission cable Application software
Operating language:
English and Chinese
Interfaces:
Serial RS 232C port in combination with a communicative cable; Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.